What are the maintenance measures for filling machine

Filling machine is mainly a small category of products in the packaging machine, which can be divided into liquid filling machine, paste filling machine and powder filling machine from the perspective of material packaging. In order to reduce the occurrence of equipment failures, operators will perform certain maintenance after work. Let's take a look at the measures.

1.Since this filling machine is an automatic machine, the sizes of easy-pull bottles, bottle pads and bottle caps are required to be uniform.

2.Before starting the car must first use the handle to turn the machine, see if there is any abnormality in its rotation, it is really normal to start the car.

3. When adjusting the machine, the tools should be used properly. It is strictly forbidden to remove the parts with too large tools or too hard force so as not to damage the parts or affect the machine performance.

4.Whenever the machine is adjusted, be sure to tighten the loose screw, use the handle to turn the machine to see whether the action meets the requirements, the party can start.

5.The machine must be kept clean, strictly prohibit oil, liquid medicine or glass crumbs on the machine, so as not to cause machine erosion.

When sterilizing the filling machine, loosen the upper and lower fixed screws, disassemble the placing liquid system for overall disinfection, or disassemble it for separate disinfection and cleaning. That's the end of this sharing.